Qorvo DWM3001
| board ID | radio | deployment |
|---|---|---|
| dwm3001 | BLE UWB |
The dwm3001 boards available in IoT-LAB are Qorvo DWM3001-CDK boards. They are build around a DWM3001C module which contains a nRF52833 ARM CortexM4 microcontroller from Nordic with BLE and a DW3110 UWB (Ultra-Wide Band) transceiver.
The dwm1001 board can reset, debug and program the ARM Cortex M4
through the embedded debugger (JLink) connected to the gateway USB port. This
component also allows a UART connection to the M4.
IoT-LAB special configuration
The serial connection baudrate should be configured at 115200 bauds in the firmware and use UART0 on pin 15 (RX) and 19 (TX).