Phytec PhyNODE-KW2X
| board ID | deployment |
|---|---|
The Phytec PhyNODE-KW2X provides a 802.15.4 radio interface and run on a NXP Kinetis KW21D256 microcontroller
The PhyNODE-KW2X board can reset, debug and program the ARM Cortex M4+ through the embedded debugger (OpenOCD) connected to the gateway USB port. This component also allows a UART connection to the M4. The input power source is configured through the power management.
IoT-LAB special configuration
The serial connection baudrate should be configured at 115200 bauds in the firmware.