Nucleo-F070RB

board ID radio deployment
nucleo-f070rb BLE Nantes 8

The Nucleo F070RB board is based on an  MB1136 reference board built on top of an STM32 micro-controller in LQFP64 package.

The Nucleo-F070RB board can reset, debug and program the STM32 through the embedded debugger (ST-LINK) connected to the gateway USB port. The input power source is configured through the power management.

IoT-LAB special configuration

The serial connection baudrate should be configured at 115200 bauds in the firmware.

Schematics and Datasheets

In details, the main hardware components contained in the node are :

Extensions

Nodes in Nantes site are equipped with wireless extensions.

STMicroelectronics X-NUCLEO-IDB05A2 BLUETOOTH Low Energy (BLE) Expansion Board provides a demonstration and development platform for the BlueNRG-M0 BLE Network Processor Module. The BlueNRG-M0 is Bluetooth v4.2 compliant and FCC and IC certified.It supports simultaneous master/slave roles and can behave as a Bluetooth Low Energy sensor and hub device at the same time.